- Original Apple Watch in 38mm or 42mm with Digital Crown, Retina display with Force Touch, Heart rate sensor, accelerometer, and gyroscope.
- Sapphire Crystal screen
- Wi‑Fi (802.11b/g/n 2.4GHz), Bluetooth 4.0
- Up to 18 hours of battery life
- 316L Stainless Steel plated in 24ct Yellow Gold, 18ct Rose and 18ct White Gold
- Optional finest Quality straps in Alligator, Python, Shark, Ostrich leather.
- Custom Hand-engraving (sides and bottom) available on request
At Carter Lux we strive to bring you the highest quality 24 Carat Gold Plating and professionally assembled Apply Watch.
During the manufacturing we perform the following test:
A NON-DESTRUCTIVE X-RAY FLUORESCENCE METHOD FOR ANALYSIS OF METAL ALLOY WIRE SAMPLES
Although quantitative analysis of metal alloys is typically accomplished by wet-chemical techniques, complete dissolution of some metal alloys can be difficult. Here, we report an alternative non-destructive energy-dispersive x-ray fluorescence (EDXRF) method for determination of nickel, gold, copper, and silver in metal alloy wires. Sample preparation is simple and consists of mounting wires as a single strand in machined polyethylene sample cups. Wires are analyzed in two symmetrical positions nearly parallel to the x-ray beam, thereby improving the external reproducibility of the analysis. Ideally, standards and samples are matched in terms of chemical composition and diameter. For 50 mil copper-silver wire, four certified reference wires consisting of various copper-silver compositions and matching the unknown diameter were used. However, we also investigated standards of different elemental composition and thickness. For analysis of 25 mil nickel-gold wires, 20 mil NIST standard wires consisting of copper-gold were applied for standardization and compared with certified 25 mil nickel-gold standards. Variations in wire diameter were corrected using an infinite thickness approximation, and nickel intensities were calculated from the copper intensities using a fundamental parameters calculation. The standard curves obtained from both approaches are similar, indicating that wires of varying thickness and composition can be applied as standards. Analysis of copper-silver and nickel-copper wire “unknowns” agrees with certified values to better than 0.3 wt %. We conclude that this rapid, non-destructive method could be a useful alternative to wet-chemical methods for many applications.
The Carter Lux Apple Watch Diamond Edition
The Carter Lux Apple Watch Diamond Edition is supplied by setting jewels, which endows the Carter Lux Apple Watch with its unique qualities, playing with a myriad of precious stones of extraordinarily varied hues, dimensions and shapes. To achieve perfect uniformity of tone, three times more gems must be cut than are actually necessary for the bezel of the watch. Each one is individually placed according to its destined position in this piece of illuminated marquetry.
Available exclusively from Carterlux.com